2009 Nissan GT-R "switches brake pedal 2010" Questions

...brake pedal and hold the f*** on!be aware is very violent on the vehcile and can destroy gearboxes. if its still under warranty the dealers can tell if this has been done may not pay to repair.the ...

...in park If your parking on an incline, that would possibly cause it plus switch at brake pedal may need to be adjusted. If you find pushing harder on brake pedal helps, have it adjusted, or

brake pedal When I apply my brake then release it , I will hear a click sound usually once or twice only when releasing the brakes . It sound like its near or around the pedal area. This sound will go

brake pedal. Those switches are cheap plastic, and can either break or become loose enough to quit working. Take a light and check it out, God bless your efforts. check fuses and bulbs if all are good

.....key in off position brake light switch is on the brake pedal arm under the dash. check to see if it has been kicked out of place. it is a plunger type switch with 2 wires going to it on the pedal ...

2010 fusion tail lights won't turn off 2010 fusion tail lights won't turn off I suggest check brake switch, underdash, top back side brake pedal or some short/ground there.

brake pedal. why? You listed this vehicle as a 2006 Accent, yet you write it's a 2010. If 2006, it's probably the brake lamp switch. However, I've seen all three brake light bulbs burn out

brake pedal position sensor . The brake pedal position sensor is under the dash hooked to the brake pedal arm . You need a wiring diagram to tell which wires are what . The pedal position sensor isn't

...brake pedal incase its sticking but have had no luck and had new discs and pads fitted in july 2010 That switch that you checked on the brake pedal,you need to replace it and then you brake lights ...

brake pedal is depressed. The shift interlock system consists of a shift lock actuator mounted on the selector lever. If the ignition switch is in the RUN position, the shift lock actuator is disabled