2009 Mitsubishi Galant "crank sensor" Questions

Ad

Question about Mitsubishi Galant

1 Answer

cant find the crank sensor i can not find the crank sensore on a 2001 mitsubishi galant HI' to find the crank sensor you need to remove timing cove, Is by the crankshaft pulley

Ad

...also why did you have to replace the old one? Was the old one starting the car? If you did not check the crank sensor that maybe your issue. Or the other way if you are talking about the crank

Ad

Question about Mitsubishi Galant

4 Answers

...your relays, if those are all in spec or getting power then check you crank sensor for power. most likely the coil. however if those are all good then check wiring harness for breakage and then

...a good spark. A few times it seems to want to crank....Never had a problem with cranking before. Put it on a scanner, it may be a crank sensor, timing positioning sensor,may have a bad timing

...crank position sensor located at the 2 o`clock position hidden behind timing cover and crank shaft pulley. If you look closely in well lit area or use a flashlight you can follow the (CCPS) harness ...

Question about Mitsubishi Galant

2 Answers

Crank/cam sensor, temperature sensor. Good luck Mai My car cranks but wont start. The MIL is not on i tried to retrieve DTCs from scan tool but it isn't communicating with the PCM. What tests should i

Question about Mitsubishi Galant

1 Answer

...crank sensor. The crank sensor was changed to no avail. The fuel pump is not turning on when the ignition is turned to the on position. What is my problem? CHECK A FUSE CHECK THE TIMING AGAIN AND U ...

Question about Mitsubishi Galant

1 Answer

...crank position sensor. The car started fine for a few minutes. Once engine was turned off it would not restart and I retrieved codes P0335 and P0300 Question: where did you buy the new crank position ...

...crank position sensor on my mitsubishi galant. You did not specify year or engine size, but... The crank position sensor is located inside the timing cover, behind the crank pulley. The wiring for it ...

...sensor. Test that then move on to the ignition control module. When it does not want to run watch the tachometer while cranking to see if it registers an RPM reading. When it fails will it crank and ...

Not finding what you are looking for?
2009 Mitsubishi Galant Logo

94 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...