2009 Jeep Wrangler "bent door" Questions

...bent so it does not work correctly. So I need to remove the outter door handle to bend the latch back to where it should be. Does anyone know how to remove it? The handle is held in place by two ...

...door. the rods are bent at the end to slip into the white plastic joint. this design is stupid and often times that joint can break, or the rods fall out. solution is to reattach them together and ...

door lock. If the leaver was bent, the travel distance is shortened and does not push the leaver on the door luck to release it from the striker. Your going to have to remove the door panel and get to

...mine a little to get it to stay closed. Unfortunatly I left it open the other day when I went thru a car was after fueling and the door is bent now so I have another issue to deal with. hope that ...

door will not unlock believe arm is bent or un latched door will not unlock believe arm is bent or diconnected unable to remove panel or open door try using a slimjim to unlock door.

...down the door lock. the rod or latch has miss aligned, it will be a a hole but you have to take door card off and remove actuator to see if broken or bent, if bent you need to free up the door ...

bent door on fuse box Where can I buy a replacement door for the fuse box in my 2002 Golf? It is thin, black plastic...pretty small. It got bent when I closed the door on it. Junk yard.

...latch solenoid tip and bend tab on door latch about 2mm towards hinge. The fuel door is flimsy and tends to get bent. Once it is bent it prevents the latch solenoid tip from releasing the door

...door panel, check to make sure none of the lock linkage is bent. If it is bent try bending it back. If its not bent pick up a can of white grease and spray all the moving parts inside your door that ...

it will set of the ABS system. I have an 08 Wrangler myself, had this issue after my lift. after my bent tie rod. LOL look at your steering wheel and when you drive is the Jeep flat? you can answer me