heater fan does not work in setting 1 and 2.... my heater fan however, does work on speeds 3 and 4. you need a blower resister
heater case. This little device controls fan speeds. Yours must be broke. Just pull off the 4 or 5 wire electrical connector, unscrew the 2 fasteners, and pull the unit out for replacement
HI MY 2006 FORD ESCAPE 3 SPEED HEATER FAN STOPPED WORKING Does the high setting work? If so, you have a bad resistor. you ccould check the fuse box and see if the fuse has blown
...fan BWM heater problems--display and switches working on car heater but fan not working your fan speed regulator located on your heater core box is bad if its just one or some of the speeds. if the ...
...heater fan working, unplug heater under hood and put 12 volts to it from the battery with a wire (single black wire running to back of fan). If works then problem probably the resistor which is ...
heater fan quit working. Lower 3 settings on heater fan quit working. I checked for fuses could not find one just for lower settings. And just resently my rear wiper quit also. have the block resistor
heater fan makes a loud squeal in the first 3 I have a 1997 Chevrolet S-10. The heater fan makes a loud squeal in the first 3 switch positions in A/C and heater mode. The squeal will work itself out ...
...fan chevy malibu -2003 , heater blower is not working in 1, 2, 3 and fan position . it works in 4 and 5 position. it takes time to through the hot air. MY 2003 MALIBU AC WORK VERY COOL FOR ABOUT ONE ...
...heater fan? My heater fan doesn't work. The fan assembly is under the glove compartment. Remove cover[3 scews] unplug electrical connector. then remove the 3 bolts that hold the fan assembly in the ...
...heater or defroster or fan working all 3 stopped working fuses look intact when pulled is there a relay that controls all 3 For troubleshooting this problem,click the link below and follow the ...
952 questions posted
Usually answered in minutes!
1,139 Questions
1,083 Questions
1,107 Questions
900 Questions
559 Questions
