2008 Ford Escape "code reader" Questions

...Code Reader to clear the check engine light. If you have one just go to the menu and choose clear codes, and it will clear out all codes and the light should go out. However, if you do have codes ...

i have a ford escape 2001 v6 and i have the check engine ligth on i put the computer in auto parts and the code is p1409 what is that emission control, code reader displays nothing mere.

...a few months. Today filled the tank and drove 1 mile to work. After work the gauge read below empty and the light is on, then the engine light came on. Best check the code you need OBDII code

code reader. Some parts stores will hook to your car with their reader and tell you the problem. If the mechanic did not hook to your car with an OBD II reader, then he is just guessing what is wrong.

...code reader to search and read any stored emmission trouble codes... you can have a tech scan it for you or you can buy a realtively inexpensive code reader at any discount autoparts store like ...

...when in drive at traffic lights Is it sparkplugs , thotle modual or engine management computer Need to put scanner or code reader on it ,to check for codes,before you can proceed. Not a guessing

...to turn off check light. If it comes back,you need to check for codes,by hooking a code reader or scanner under the dash. Most likely a bad gas cap. Do not replace without an Emissions Code for ...

how do i reset emissions warning light ford 2006 escape If you mean the check engine light, the codes must be cleared with a scanner or code reader after repairs are made.

code P0446 came up on the reader. Replaced starter and did not help. That code does not have anything to do with it not starting. That code is for EVAP control leak. What is the car doing when you try

...anything on a CPU use a code reader for the process. All removing a battery lead does is to further corrupt the CPU program even further.. At the same time have the codes read for possible