reset oil light on dodge nitro This one is simple...Insert key in ignition and turn to on position (do not start engine)Press the accelerator Pedal fully to the floor and release 3 times back to back.
...reset this 1. Turn the ignition switch to the ON position (Do not start engine). 2. Press and release the brake pedal two times. 3. Fully depress the accelerator pedal slowly two times within 10 ...
...reset it. Good Luck and have a good XMASS. P2138 - Accelerator Pedal Position Sensor Circuit Range / Performance Problem The following can cause the code P2138: ●Harness or connector (APP ...
...reset this indicator light by turning the key to the on position, and then pushing the accelerator pedal to the floor three times within five seconds. The light should start blinking and then go out. ...
reset on 2002 Denali Hello: Try this, Key on engine off Check for flor mat(s) under accelerator pedal, depress accelerator pedal all the way to floor 3 times within 5 seconds. Hello. In order to reset
...the system did not reset. Repeat the procedure if the system does not reset. If it does not work using the accelerator pedal, go under the hood and move the linkage manually to reset the ...
Question about Dodge Nitro
...reset procedure - MY350Z.COM Apr 14, 2017 Accelerator Pedal Position Sensor - MY350Z.COM Apr 14, 2017 More results from my350z.com Try this 350z Reset proceedure (Pedal Dance) Horsham Developments ...
Question about Ford Cars & Trucks
...accelerator and brake pedals. 7. The Service: Oil reset complete message will no longer be displayed. 8. Rotate the key to the off position. For vehicles with push-button start, press the START/STOP ...
...reset sequence. Begin with the vehicle off. Turn the key to the ON position, but do not start the engine. Press the accelerator pedal to the floor and release it three times. Turn the key ...
65 questions posted
Usually answered in minutes!
262 Questions
49 Questions
37 Questions
42 Questions
25 Questions