2009 Chevrolet Malibu "changing driver side headlight" Questions

...driver side and it came on and it was good, when I went to install the passenger HID I noticed that my socket was kinda melted and the light didn't work, so today I went to autozone bought a new ...

...LIGHT ON THE DRIVER SIDE DOES NOT COME ON WITH CHANGE OF BULB check the fuse for the left side headlight, there is one for left and one for right. it is a 15 amp. fuse. its # 51 in underhood fuse

driver side headlight out changed the bulb already still out is there fuses or is there a bigger prob w wiring or something the orange running light is still working on that side no you don't have to ...

...driver side low beam I have changed twice each time and work upon replacing after turning the car off and turning it back on the low beam going out. The high beam works fine and the low and high on ...

Changing headlight, low beam, drivers side, 2002 Malibu underhood at light there are two plastic slide pins on top of assembly. pull up on the pins to release assembly. then pull assembly from car, ...

...driver's side door open to access it. It is perpendicular to the dash. You have to pull the padded cover off to expose the fuses. I think the headlight fuse is on the far right of the group. There is ...

driver side headlight low beam is out changed it with a new one and still no light, i've checked the fuses too what do i do now? Check the actual harness for power once you turn the lights on. It ...

changing driver side headlight bulb Is it easier to do it myself or have it done. I looked and seems I need to take off a lot of plates and guards in order to access the lamp. Is there an easy way to ...

...driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement 15 posts ...

...side headlight assembly? I need to change out the drivers side headlight assembly. Are there only the 2 screws on top? Please HELP!!! You need to remove the bumper assembly to remove the