2009 Chevrolet Aveo "turn change oil light" Questions

...oil was getting hot and creating sludge that was clogging the pressure sensor. Flush the engine, change the sensor, check for coolant leaks. After I replaced the thermostat housing (the crack got ...

...change. Your cars computer is programmed to turn that light on every so many miles to alert you and then after you change to oil there is a procedure to reset it. You owners manual should tell you ...

...change light turn the key on and press the gas pedal 3 times all the way to the floor without the engine running. The fact that the check engine light is on indicates that there is another problem ...

...the change oil? turn off the car put the key on on,press the gas pedal two times then the third time hold down until the light starts flashing.then turn it to offthe key and start it.It should go

...light was on...so I decided to drive it around the parking lot of my job to see if maybe it would help get something moving. Driving in reverse was fine, but when I would attempt to drive forward the ...

change oil soon light takes time to turn off when i turn the car on the change engine oil light takes time to turn off even the oil is still new faulty check valve in the oil filter replace oil filter

...change light in a 2003 olds alero turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again. Should be listed in your ...

...change oil light. Put the key in the ignition and turn it to the 'Run' position, but do NOT start the engine. With the key in this position, slowly push the gas pedal all the way to the floor three ...

...turn off the change oil light after the oil is changed? You don't need to do anything to turn off the light, it's not a change-oil light, but low-oil level light. Check whether the oil level is ...

...turn off warning lights on dashboard Change oil light and trac off lights, Change oil light: remove the driver side fuse cover, there is a reset switch. turn key to on position (engine NOT running), ...