Samsung ML-1640 Monochrome Laser Printer "empty paper tray" Questions

...Paper tray is empty. Load the paper in the Tray. ? The toner cartridge is out of toner. Remove the old toner cartridge and install a new one. See ?Installing the Toner Cartridge? on page 2.4. ? You ...

...Paper tray is empty. Load the paper in the Tray. ? The toner cartridge is out of toner. Remove the old toner cartridge and install a new one. See ?Installing the Toner Cartridge? on page 2.4. ? You ...

...paper weight for your printer. 2. The inside of your printer needs to be cleaned. 3. The toner cartridge is empty and needs to be replaced. To correct this problem, try the following steps in order. ...

Paper tray is empty. Load the paper in the Tray. ? The toner cartridge is out of toner. Remove the old toner cartridge and install a new one. You may read the manual of the printer for troubleshooting

...makes but it sounds excessively fast. Then the red and green lights begin to flash simultaneously. Any help? Hi, try to fixed the paper cassette tray and the cover it might sensing empty

...empty. I've tried laser paper and lighter weight paper. Any ideas? Is it just time to get a new one? You could try cleaning the rubber feed roller with a slightly damp rag, or even having feed assy ...

empty Verify there is paper in the tray. Open the duplex unit access door just above Tray 2 on the front of the printer. Check the black-paper present flag by looking in through the duplex access door

...empty 3 universal paper trays are linked by paper type, size and color. When tray 3 (on the bottom) is selected as the default, the printer moves to tray 1 (top) to continue printing, but when this ...

...empty and to put paper in. Paper is in tray 2 and full. I can only print from Tray 1 when I manually switch printing to Tray 1. check the paper type and the paper size from the printer menu, if it is ...

...feeder roller wont work paper feed rollers wont feed paper through and also paper tray is empty prompt comes up when there is paper in the tray tried small amounts of paper and still says tray is ...