...max. rated. 3. Change printer setup to feed from rear. 4. Print. Depending on what software you print from, you may need to change this each time you print if you intend to keep printing from that ...
...max - 76mm to 216mm (3" to 8.5") lenght min/max - 127mm to 432mm (5" to 17") Printer will accept paper weight between 60g and 180g, that meant that all standard weight of paper including cardstock ...
...opening to max then lift upward . 2)take a touch lite ,after removing the drawer shine at the inner part 3)look for any fragment of paper stuck inside 4)remove it 5)good luck ,pls rate me
Question about HP DeskJet Office Equipment & Supplies
Same Problem - Wet Black Line on back of each printed page I have tried aligning the print heads, cleaning the bottom plate (lots and lots), cleaning the protrusions on the inside of the printer, ...
...max.) Transparency Film N/A Labels N/A 4 x 6 Photo 236 gr/m2 (145 lb.) Custom Media 34 gr/m2 (9 lb.) 3. Make sure that the Paper Type is correctly set to either Plain or Photo. 4. Run an alignment of ...
Question about Xerox Office Equipment & Supplies
...face-down in the tray. NOTE: Load a maximum of 10 envelopes into the tray at one time. Do not exceed the MAX fill line on the tray. The envelope may wrinkle depending on its weight and stiffness. The ...
Question about Office Equipment & Supplies
...3 years ago used. I replaced the rollers, and the whole front panel to the printer (sensor tabs were broke). All told, I still got the printer for a steal. It has ran fine for about three years, but ...
...3, 4 or 5. Make sure the orientation is set to Landscape and select [OK]. At this point edit the page with the information you want printed on the envelope. Select [File] from the toolbar. Select ...
20 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions