Canon PIXMA iP90v InkJet Printer "remove print heads ip90" Questions

do I reseat / remove the print head? What is the blue liquid inside the bag of a new print head? How do I order replacement parts? How do I prepare the machine for transport / storage?or buy a new one

...remove the print head in a Canon ip90? After opening the purple cover, the printer head will move to the center. There should be a gray tab on the left side of the forward facing opening (about the ...

...print head move to the middle of the printer. 2. remove both cartridges 3. What is left there is the print head holder. Slightly move it to the right and gently lift the print head lock. 4. Grasp the ...

Remove the ink cartridges from the print head & Use wet warm cotton swab or use alcohol to thoroughly clean the print head. Repeat this until there is no ink residue coming off on the cotton swab.

...ip90 printer won't print anything goes through all the motions but no ink comes out. brand new cartridges in it? Is the shipping cover still on the printhead? If it has been removed, wipe the ...

print head has a sensor that passes over it each time it moves. The band is a little transparent and appears to have vertical lines in it. That needs to be cleaned.  Remove power from the printer

...remove the print head which holds the ink cartridges (although I could not figure out how to do this but it's doable) then put a paper towel soaked with distilled water (tap water probably OK) in the ...

...print black. Options 1. Remove and reinstall black ink cartridge 2. Remove black ink cartridge and clean nozzle. I used my finger and it worked! I've had nothing but problems with this printer. I ...

remove and install a new print head. The Canon online guide was of little help. Thanks, Michael The important point is moving the head to the left, or sliding it left or right, so you can actually SEE

...print head move to the middle of the printer. 2. remove both cartridges 3. What is left there is the print head holder. Slightly move it to the right and gently lift the print head lock. 4. Grasp the ...