Brother HL-2150N Laser Printer "new toner light" Questions

new toner The toner light came on, we put in a new toner cartridge (new Brother cartridge, not a refill), and the toner light still does a slow blink, and then won't print when we try to print. Is the

new toner? According to the operation manual: If alarm light and data light blink every 5 seconds- TONER LOW (purchase more toner and have it ready when the 'toner empty' is indicated). If alarm light

put a new toner cartridge into it. I've shanken the new cartridge (and the old one) and still the toner light will not go out? Have you removed the tape? Try OEM toner from the manufacturer. Good Luck

...new toner is inserted it has a switch that is activated when new cart is installed. Machine has two toner light errors blinking is toner low, full on is toner out all stop, I guess yours has not ...

...new toner and have it ready for when Toner Empty is indicated. (solid) Toner Empty Replace the toner cartridge with a new one. User's Manual is available at the following location: ...

...new toner and drum kits and the toner light is still on. unable to print. what's the problem? Drum counter usually has to be reset.. Check user manual or go to Brother's site if you want to drive ...

...and put it back into the printer. That may get you some more time before the light comes on again but I don't suggest doing this. Bottom line is that you need to buy new toner. Regards! EJ ...

...new toner, but that's not the case. I sent back one new toner thinking maybe that was defective, but the second new toner made no difference. I've wasted hours putting the toner cartridge in and out ...

...new drum Drum light on, so I replaced drum, reused the existing toner cartridge. Then got a blinking toner light, so I replaced the toner cartridge too. All lights are OK, but I now only get blank ...

...New toner and new drum just installed now wont print at all. I found this solution on the web-- Hope it helps. The HL-2070N gets stuck in a toner end-of-life error condition. Perform the following to ...