it out! use a non magnetized screwdriver and take the top cover off then unscrew the screws holding the guide bar in and gently pull the ink cartrige out you may reuse the cartrige but not recommended
it says cartridge error 50c what do i do? HAVE YOU PULLED OUT YOUR INK CARTRIDGE'S AND RE-INSTAL ALSO CHECK THERE INK LEVEL'S AND RUN A RE-ALINE FUNCTION Hi, Remove the cartrige from the printer and ...
Question about Lexmark X Office Equipment & Supplies
...center. Remove both cartridges from the carrier. Close the printer cover. Re-brick your printer by pulling out the power supply - black box behind the printer where the power cord is plugged in to, ...
Question about Lexmark X Office Equipment & Supplies
...pull out the cartridge and turn off the printer by force by simply pulling out the plug. then after 3 minutes plug the printer back and turn ON. again it will ask for the missing cartridge. now put ...
prints all colors except black lexmark; prints the whole page but leaves out the black print. i pulled the clear strip off before i reinstalled the new cartrige. Still won't print black First remove ...
pull cartrige into the pinter. can you e-mail me a picture? If the cartridge carrier won't position to the middle automatically even when your printer is powered on and the cover open, just unplug the
Question about Lexmark X Office Equipment & Supplies
i changed the cartrige an now i cant get it to close i pulled the front panel off and replaced the ink and when i tried to close the front cover that shows the phone key pad i cant, it wont secure and
I have a lexmark x4650 printer and my son pulled a plastic strip from some where. Now my printer tells me that the cartrige is jam. When I opened it there was a small spring that I have no idea where ...
...cartrige. The power button from that point on did not even work I have to pull the plug to turn the machine off. I have done this many times without any problem. What is the reason for this and what ...
Question about Lexmark X Office Equipment & Supplies
...cartrige in a conon mp250 turn on your printer, pull out the bond paper tray infront of the printer. then lift up the cover of the scanner..you will see that you can lift up the glass cover ...
199 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions