Gateway FX7026 PC Desktop "pin video power cord wiring" Questions

video card, and other drives. I Just left one memory card and the motherboard with the CPU (with CPU Fan) and the chipsets (North Bridge and South Bridge). The same problem occurs with standby_led on.

...pin connector to the motherboard. Remove all the PCI cards, the video card [if applicable], memory, all peripherals, disconnect the data and power cables to all the drives, check that the front panel ...

...pin. NOTE: Please remove the AC cord from the computer and that all keyboard, mouse, video, network cable and usb slots are disconnected and empty. Do not power the pc until you are certain you have ...

video card, etc. So all I was left with was a psu, motherboard, and the power switch connector all connected to each other in an isolated environment. So I plug the power cord into the psu and the LED

...video because no power to cpu by 4 pin or 6 pin connector) plug 4 pin connector and test power on. if on and off check cpu power section (mosfets) if burned one pls remove ... you can test short by ...

...pin. What should I do now? one is power one is standard vga and one is a dvi cable, the only time you would need the dvi is for a higher quality of picture. if you do not need the higher quality (ex. ...

...video adapter. Otherwise, contact a servicecenter for assistance. While replacing a part is a nuisance and may becostly, your documents, pictures, and e-mail should be safe and will beavailable when ...

...pin that should have a black wire. This should cause the power supply to turn on and you should hear its internal fan spin up. If not, this could be a sign the new power supply is also dead. Plug the ...

...pin ATX main power cable plugged into the motherboard. Observe the Green wire, and look at the Black wires. The Green wire is the Soft Power On wire. (Also abbreviated as PS_ON) This is a 5 Volt DC ...

...pin plug if your power supply has one. This power connector provides power to the CPU. Your system has no chance of posting without this connector plugged in! Check your motherboard owners manual for ...