Numatic Henry Bagged Canister Vacuum "sensor" Questions

...filter. Red lights remain on. Can I fix it? It sounds like there may be a problem with the vacuum's sensor that detects when the bag or filter is full. Here are some troubleshooting steps you can try ...

...the height adjustment on your vacuum. They are: Brush roller, Servo Motor, Control board, and Sensor pulley. You have eliminated two of the possibilities already. I would ask you if either of ...

...a Genie 2020L garage door opener. Door start to go down then stop and return. Tried cleaner old sensors. Same. Noticed red light on sensor 3blinks then off....repeat constantly. Replaced sensors

dirt sensor The dirt sensor on windtunnel supreme doesn't work anymore. It is a bagged windtunnel. The sensor remains red. The sensor remains red.

...just spins in circles and then stops and beeps 9 times.  I cleaned the front bumper and the 4 sensors and it didn't help.  I taped white paper over the sensors and that didn't help either. ...

ERROR MESSAGE Roomba saying something like ''please inspect cliff sensors When Roomba says "Please Inspect and Clean Roomba's Cliff Sensors" it means that Roomba 500 series sees a constant cliff.This ...

dirt sensors stopped working Sadly if a vacuum cleaner has a sensor plate that senses if a room or floor surface is dirty, it will have a sensor plate built in. Check to see if this is possible to ...

embedded light sensor stays red all the time I had a big clog in mine and took the back off to clear it. Ever since I reassembled it, the embedded dirt light has stayed on red, all the time. I took it

Kenmore Progressive issue The dirt sensor red and yellow lights stay on all the time now. I've had the vacuum for two months. The suction is still fine, so I assume it's a sensor problem. But if this ...

Where are the sensors? What sensors? Most vacuums don't have any but It depends on the make and model. On the Neato vacuum, XV series, there are stair sensors in the front bottom corners. These can ...