Goodman CLQ36AR49 Air Conditioner "furnace turning change temperature setting" Questions

...turning heat ON), the water is already hot in the furnace, and is circulated immediately. If it was a "cold start", you'd have to wait for the water in the furnace to heat up from room temperature. ...

...furnace where the pipes from the outside unit connects. As far as the auxilary heat, this is normal when the house temperature drops to far below the thermostat set point and they will turn off when ...

temperature back up to normal. Shouldn't it heat up the house faster than that? Is there anything I can do to make it heat up faster? Thanks for any help, Bill Vancouver, BC Canada carrier infinity 96

...turning the thermostat off and back to heat in order for the heat to come on. When it comes on, runs for a few minutes and shuts down before reaching the set temp. I have changed the batteries and ...

Furnace doesn't reach desired temperature Have Armstrong Ultra V furnace. It shuts off before thermostat setting. Have changed thermostats and new one does the same thing. Furnace starts and heats but

...Furnace starts up then shuts off turns on for 5 minutes then shuts off If you have a standard thermostat and not a digital stat, the problem could very well be the 'heat anticipator' setting on the ...

furnace or outdoor unit to verify what wires are for what purpose. Also be sure there are no splices in the wire that could change the wire colors between components. R (red) or Rh (Red heat) 24 volts

...Wire. 400cfm equals a ton of cooling= 1200 sq. foot, For cooling you need High speed. For heating it is whatever the temperature rise across the coil is, which is located on the furnace/air

...furnace under normal conditions: Draft inducer motor starts. Runs for 2 min, then there is a loud relay click (I believe that this is the gas valve turning on). I then hear the spark igniter go and a ...

...furnace and turning it back on but nothing changed. Check outside breakers. Open up outside panel and see if contactor is pulled in. If so you have a voltage problem or a bad capacitor. Sometimes a ...