Goodman CLQ36AR49 Air Conditioner "compressor smells burning" Questions

...burning so I stopped it. After 20 mins. I tried again. Same situation. Sounds like the compressor is seized up and the smell is from the clutch slipping when it tries to engage. If that is the case, ...

hot compressor hi i have kitchenaid KBRSS22KKWHOO and the fridge and freezer is not cooling i hear fans running i took off the back cover and the compressor black unit is hot i removed the relay ...

...AC has trouble starting after it has inactive for a month or more. The fan will run, but the compressor will not fully start. It hums momentarily then stops repeating every two minutes or so. ...

...compressor isn't kicking in as it should. Cleaned filter same problem. Before cleaning there was a burning smell. What could be the problem? there is a short or a ground or capcitor is bad. i would ...

...burning smell come from the unit and now when i turn it on i hear the hum of the compressor trying to turn but nothing else happens. it is a few years old and out of warranty so is there something i ...

compressor issweating. What could be the problem, and what's the solution? Seems like your blower motor is burning up. Its the motor that blows cool air across the refrigeration coil. If it is a whole

smells like gasoline or oil or the like. is this dangerous? What's the deal? I am not sure what the deal is, as this is a 10,000 btu air conditioning unit. No gas in this unit except for the freon gas

The fan comes on, but air compressor wants to start but won't. Funny smell. Thanks Mike It is likely the capacitor is faulty, when they go they usually heat up and burn hence the bad smell. If your ...

...compressor will not kick in and I get a burnt smell like wires or rubber burning. what might cause this? Loose wiring/high/low voltage may create wire burning. Please call repairman to check and ...

...burning smell, one of the capacitors is faulty, and should be checked immediately. Quite often the compressor start capacitor, will get hot and start to melt. Have it checked by qualified technician ...