Question about Goodman Heating & Cooling
blower relay stuck in. only 2 thinks can keep ur blower running, one is a bad t-stat, 2nd is ur fan relay on control board, in your blower compartment u have ur t-stat wires going in, turn breaker off
Question about Heating & Cooling
blower relay in the furnace that's probably bad. In the heat mode the blower is on a temperature relay, in cooling mode the blower has to come on immediately so there is another relay for cooling. The
...should I be reading from the brown wire? The brown wires do not go to a blower relay,they go to a start capacitor. They are power in and power out when the blower is energized through the fan
...blower relay for cooling and the blower doesn't come on then check across the relay points for the blower and if you have 120 volts and the blower isn't running then that relay is bad and needs ...
...not and the blower still keep running like before. -What you need to do: -Unplug the "Blower Relay" If the blower is OFF then replace the relay. Sound like the blower's relay stuck at (ON POSITION) ...
blower motor relay switch problem I have a weather maker 8000, everything works fine but blower motor wont come on, just a click, and after it does not come on the the furnace stops, is this a blower ...
Question about Carrier Heating & Cooling
...relay then you check blower electric connection there is electricity or not if there is electricity and blower won,t run it,s mean blower motor /capacitor is faulty if there is no supply for motor ...
...blower relay. On most modern furnaces the blower relay is part of the circuit board. Good luck Pull the stat off the wall, if the unit fan continues to run then your fan relay is bad or receiving ...
...Blower relay contacts pitted and stick in on position. BAD Control BOARD, fault or adjustment program keeping relay energized. Bad emperature sensor not telling Board unit has use up cold air. loose ...
...problem? Hello The new motor sounds HOT wired.It must have one leg connected to the blower relay.If it is off the relay(correctly) ,the relay is stuck/welded and should be replaced.In the blower
34 questions posted
Usually answered in minutes!
1,056 Questions
416 Questions
195 Questions
147 Questions
138 Questions