Dell Latitude E5400 Notebook "replacement usb port" Questions

usb port on dell latitude laptop instructions how to fix or replace usb port o my dell latitude laptop. its the only usb port You will have to take the machine apart somewhat, or at least to the point

...usb port i have dell latitude 640. today its usb port stop working. i attached usb storage device, usb mouse but noting detected. can i replace this usb port? Yes you can, but in most cases it's just ...

...USB port on my Dell Latitude D410 shorted out. Can this be repaired/replaced? This happened when I plugged in a brand-new FitBit base station. Here's what happened: -- plugged in FitBit base, ...

USB port fried something on the MB and it needs to be replaced? The motherboard is a U470N. If I replace it could I switch to the same board w/ NVIDIA graphics? Thanks Sadly you may be right. I'm sure

My D820 USB ports are not functioning properly D820 is on a docking station and none of the usb poerts will recognize anything you attached to them. Try reinstalling the drivers for the USB by going ...

...USB port failing. I have had many of them replaced under warranty, and I have repaired some. The USB port breaks loose from the mother board and stops working. It is possible to SOMETIMES disassemble ...

usb ports is there any way to replace some of the excess ports on the back of my laptop that i don't use with usb ports? Yes, but I would not recommend it as you would be soldering wires to your ...

...usb port, i am a tech, i have been working with computer for 5 years but have a problem, My dell laititude usb port is damage, i need to replace it or is there a another way to install a usb ports ...

...usb port was connected to printer. Usb port pins are now bent and port is unusable. Dell said I have to replace motherboard! Is this the only way? No, it's not the only way, if you have an unused ...

problem. There are usually a lot of bad D600 motherboards on Ebay. Or try to find just the USB port you need. Fairly simple replacement task, but laptop dis-assembly will be required to reach the part