Question about Vivitek Televison & Video
...new lamp and still have solid amber light. I have unplugged the tv and replugged but the light still comes on. Its working fine, and purchased from a reputable firm. What should I look for? Press the ...
...Check the internal fuse - sometimes the fuse fail by itself due to power surge, replacing with new one cure the problem. However if the fuse blew again then this is an indication that you have a ...
...available. Please remember not to unplug the tv from the power outlet because this will reset the error code. The television must be in the power off state or shut off state to retreive the code. ...
...indicator indicates that I need to replace the lamp cartridge. The picture appears fine but it says the lamp operation exceeds its rated lifetime. The manual says it should only be replaced by a ...
...balast, that seems to be working but the light doesn't turn on. I find it hard to believe my brand new bulb is bad already? Test your error code by holding menu and input button on the tv for 5 ...
...available as replacement parts. One option for you could be to have a detailed repair estimate generated by a local servicer. Taking that info, we can guide you through the actual repair. Dan Hello, ...
...available. If you have an older standard TV (4:3) and want to fill the entire screen, then select 'CROPPED' for every channel(my preference). You will only see a center cut of the entire picture and ...
...AVAILABLE FROM TOSHIBA. It can be removed and sent out for "rebuild", last one I did the net cost for this was about 200 dollars. What goes bad is the Hyper board has about 2 dozen "surface mounted" ...
Question about Hitachi Televison & Video
...indicator blinks. Removed rear panels, several LEDs are lit/blinking: DP06 Solid Red, DP23 Solid Green, DP35 Blinking Green, DP11 Blinking Green, DP37 not lit at all. Hoping these are diagnostic ...
Question about Vivitek Televison & Video
...available, when I opened up the back, it doesn't even look like the theife opened and looked for himself. I already blew out the color wheel and the fan is operating, unfortunetly the problem did not ...
97 questions posted
Usually answered in minutes!
37 Questions
1 Questions