Wurlitzer Jukebox 1015 One More Time 100-Disc CD Changer "phillips cd changer" Questions

...the CD player? 6 or 7 phillips head screws. 2 or 3 across the back and two on each side. Slide the top towards the back then up. You will be able to get to all CD's with the top off. Hope this ...

...cd are d2 and d3 and will not ejeck Loosen 4 screws on bottom. You may want to take the two front ones out. They are phillips head. Drop the botom portion of the changer down about an inch or so. You ...

...Phillips CD player, they started with the CDM3 then the CDM4 and CDM12 etc. Around 1993 it would have been the CDM3/4. You need to identify which Decoder it is using in the jukebox or you need a kit ...

...cd changer unit are 4 screws (silver ones recessed about 3/4" or so, use phillips screwdriver) to remove. Turn unit upright again and lift cover slowly straight up. In the front of the unit is a ...

...Phillips cd player sometimes skips. It is My 3 disc Phillips cd player sometimes skips. It is not the cds because it always skips in different areas of the cds. The same cd will skip during one ...

...cd in back of my Sony CDP-C325 How do I remove? Armed with a small phillips head jewelers screwdriver, you should remove all the screws holding the black large top cover. Be careful to put the screws ...

phillips head screws that keep the top on; remove them and pop the top. This will give you access to all CD's. Remove them all, then plug the unit back in and press the open close button and check for

phillips CD Player unit CDM12 ABOVE IT. Type;CDF 91 0055647 Model: OMT CD -100 nz NR 41018750 V 100-240 any help with locating a new circut board would be most helpful. thanks Ken email [email protected]

...cd player used is a phillips pro player. When this type of player spins and stops spins again and stops, somtimes they even spin backwards generally mean it needs replaced or repaired especially if ...