Haier Energy Star ESA3183 Air Conditioner "power light 6" Questions

6 months. yes there is power to the plug and the reset works. Is it not coming on? If it isn't, is the control pad lighting up? Is any of the electronics lighting up? If not, then the control board is

...light flashing 6 times in a cycle. The local repairer doesn't know what it means!!! I have to power cycle the A/C to get it going again. Thanks in anticipation, Gary. Indoor unit coil sensor fault. ...

...light is saying VH VC. David Stowers I think that you need to turn off power to the unit and reverse the 240v wires that are on the transformer,I think that the polarity it backwards,I had a similar ...

matched, power LED will light up for 30 seconds and a beep sound (continuously for 4 seconds) will be heard. If no codes are matched, power LED will light up for 0.5 seconds and no sound will be heard

...light flikar on #6. ineed to fix out side condenssor unit cantol by the tharmostatebut idont have 24v in r Check for a fuse in the unit. make suree you have power to the transformer. There might be a ...

...power light blinking 7 times. Is this error code 67 (blocked outside fan)? If so, is this something that can be caused by snow / ice and what is likely required to fix it? Thanks in advance! Ron The ...

amp; then turned off & then on again real fast, then it wouldn't do anything. Now nothing lights up, I checked for power with circuit tester & it has power. However, the lights do not light up

...6 others ,my supply house does not want to help. Are these low voltage lights? The connector on some of these are really low grade. Power supply not big enough? Halogen lights also heat up and ruin ...

...light flashing 6 times and fan runs very slow. Thermestat disconnected has no change to fan running. There appears to be a short in the unit. Not sure where. The power to the fan is not interrupted ...

6 years old. Its been used a fair amount, but not a lot. Suddenly, it won't fire up. I hit the power button, and nothing happens. I lost the remote, so I can't use that. Has anyone got any ideas? When