Haier HDP18PA Stainless Steel Free-Standing Dishwasher "dishwasher keeps shutting turns back" Questions

...the door is opened. What do I need to do. I have unplugged the dishwasher from electric to shut it down, but when electric is turned back on the pump keeps going. Help.....Dave Relay stuck-self ...

back up. I barely used any force. The dishwasher will now turn on even when the door is open because it thinks the door is shut. How do I get the inner latch to pop back up? It seems like it should be

...keeps running, even with the door open! HELP! my best advice at this time is do not turn the breaker back on this unit i have been looking at the wiring on this unit and what your saying is happing ...

...keeps running into dishwasher Walked into my kitchen this morning to find a lake. The dishwasher was leaking water from the door. I turned off the valve under the sink and cleaned the message. The ...

...keeps running. If I reset the fault condition, the dishwasher will return to normal for 1 or two cycles and then get hung up again. Many articles I found on the internet regarding GE dishwashers ...

...keeps flashing, and no other butten you push will change the flashing of the butten. Is there a reset butten, Or can I shut off the power and turn it back on to cycle it. This is on a dishwasher Hi ...

...dishwasher when we left for vacation and forgot to turn it back on when we got back. After starting a load which did not clean the dishes I investigated and realized the water was still in the off ...

...dishwasher is being filled. IWater keeps running, fills up and runs out of the front of the dishwasher. Also it will not pump the water out at end of cycle. Check the float to make sure it moves ...

...keeps filling until it overflows the machine onto the floor. So far, our only option has been to turn the machine back on and let it keep running. Any suggestions? hi, sounds like a faulty electronic ...

How do I get my lg dishwasher to shut off cut power to it already and when I turn back on it keeps running More than likely the control panel for the washer is defective.