Question about Indesit Washing Machines
...drive belt & pulley. When fitting the new belt it needs stretching by first putting it around the motor drive shaft & easing on to the main pulley whilst gradually rotatng the pulley. You need to ...
put a magnet on the lid switch and helped start it spinning by hand and it is maintaining the spin cycle. It agitates fine fills and empties ok but wont overcome the load to start spinning. Is there a
put wachine powder in fills up with water and doesn't drain. Any advice is welcome, thank-you putting drive belt back on which has come off We have a Siemens A 08-16 front loader waching machine which
...drive belt. Samsung Front loader . Hi from retired Englishman in SW France, That's a good indication as the drain motor is independant of the main motor and belt. Quick way to see/confirm- REMOVE ...
put out an error code during the cycle, it sounds like your drive belt may have come off the motor / drum pulley. You should be able to access it by removing the back panel. Be careful- and unplug the
...put the belt on.There may be something that's missing here, though. And that is... "Why'd the belt come off in the first place?" The motor pulley and the drive pulley should be lined up EXACTLY. If ...
...put the belt on and then slide the motor towards the rear to tighten it.. then tighten the four bolts. They may simply have not tightened the bolts on the motor from factory and the motor slid back ...
...put in) you have a bad transmission seal. It is generally cost prohivitive to replace the transmission. It's time to get a new washer. Look into the front load machines which use much less water and ...
Question about Kenmore Washing Machines
...put back in only for washer to repeat same problem. please tell me this is an easy fix and not a huge problem. I am already freaking out b/c they are only 6 months old and I have soaking wet clothes. ...
Question about Fisher and Paykel Washing Machines
drive washer it could be that the belt has broken or come off. I am taking a chance now by sending you my 'standard front loading belt/motor problem' document JUST in case ;-0) -----------------------
21 questions posted
Usually answered in minutes!
105 Questions
76 Questions
55 Questions
64 Questions
30 Questions