...rewind a tape measure You'll need to take the tape casing apart but need special security torx bits to do that (a T-8 and T-9). Once apart (careful, two small springs inside) you can take the tape ...
tape rewind back into the housing if that does not work then you probably need to purchase a new tape. for whatever reasona the spring inside has gotten weak. i use a tape daily and have had this same
...rewind itself? Yes, but it is a royal pain. The tape has a slot (some are "T" shape and some are tear-drop) in the end, and this fits on to a tension coil inside the unit. What you have to do is ...
Question about Stanley Measuring Tools & Sensors
...rewind the tape once it has been completely unwound. Does anyone know? Take the four corner screws out and the last center (short screw out). Split the shells in two pieces. Seperate the yellow or ...
...tape? Pull the old blade ALL off the way out until you see where the spring attaches to the blade. Twist the old blade off while carefully holding on to the spring. re-attach the new blade and slowly ...
CAN'T GET THE TAPE TO PULL IN.. Broke or sprung rewind spring
...tape will not rewind. This is such a beautiful device and I hate to trash it. There are no visible screws holding the shells together. The shells are leather with a steel 3/16" wide band wrapped ...
5 questions posted
Usually answered in minutes!
20 Questions
11 Questions
26 Questions