Fossil AM3784 Wrist Watch "set function dials" Questions

...mode after each function is set. When done press MODE again to see steady display. If by chance there is no MODE button, the MODE button may be a dimple on the caseing you can push in with a

press set to cahnge and adjust each function, Hour, Minute etc. after each function is set press mode to mave to the next function when done with your functions, press mode to return to a staedy dial

...one for each year after... So, for 2011, set the function dial to '3' since it has been 3 years since 2008, the last leap year. Next year it should move/be set to '0' again since 2012 is a leap

dials which gives out the month, day and date. Also the functionalities of the 12/24 hour format. Need to get some help here. I looked at a picture of the watch. I see the date. the dial that is right

...blinking, press set for each function after each function is set press MODE to move onto next function, Hour, Minute etc. Once all set press MODE to stop the blinking and restore normal steady

...on Luminox 8101 dive watch ( functions of dials & setting back to zero). pull the crown out and use the top and bottom buttons to zero out. when pull the crown out each position set a differnt ...

...set or reset it as it is part of the main gear train - it just counts the seconds. Top right dial is 1/10 seconds counter and runs only when the chronograph function is engaged. One full circle ...

...set them? one of them is the seconds hand of your watch, this sub dial will keep on moving even if the watch is not used as a stop watch. the other 2 sub dials are for the stop watch function. one is ...

...set them. Please help The dials are part of a Chronograph (stop watch) I assume there is a second, minute, and maybe a date function. Usually the large second hand is part of the stop watch on only ...

...set the dials to their "straight up position". This stops the chrono's function, until it is needed again, BUT the main running seconds, (at either the 9 or 6 sub-dial position, depending on the year ...