Fossil ES9944 Wrist Watch "put battery back" Questions

...battery I tried to set the time right and the pin pulled out? I'm in Australia now, how much would it be to get it fixed? Should I send it in at a Fossil shop or could someone else help me the same? ...

...battery out, put a new one in, put the back of the watch back on. Or take it to a local jeweler, ask what they charge and how long to do it. It's usually $5 to $10 depending on the price of the ...

battery number. It's one with 3 batteries. On the back case it reads C023-088069 Y / 1092528 / GN-4-S. Any help would be greatly appreciated. Energizer 371/370 It uses 3 of them. Careful when opening.

put the battery in and replacing the back ==> I PROBABLY SHORTED the 'new' battery thereby DRAINING it. <== After extremely carefully putting another new battery in and replacing the back on and

...Once that metal piece is out the battery should come out too. Put the new battery in and cover it with the metal piece. Put the back of the watch back on and snap it into place. Best wishes. ...

...Put the new battery in place (do not force) and secure back the battery lamina holder.There is a AC(All clear-reset) contact on the mechanism.Using the tweezers touch one end on this contact and the ...

...battery, and put the screws back is really quite fiddly, make sure it is help down properly
- Make sure before you put the circuit board back, that the two brass springs are in place. When putting ...

...back off again and the back-light worked so put some black insulation tape on the metal part that may of been touching the battery, put it all back together and all working again... really happy ...

battery contact. Read the details on battery and buy the same one. Put the new battery in. Put the contact back in place. Reset your watch. Set the time. Smile. ...and do not forget to rate, please...

...Put the new battery in, cover it with the metal tab (if there was one) by rotating the tab back over the battery like you found it. Put the watch backing back on (and replace the screws if there were ...