...BY A NYLON FABRIC COVER. MOST TUBES CONTAIN A VALVE THAT ALLOWS THE RIDER TO INFLATE THE TUBE MANUALLY OR BY WAY OF AN AIR PUMP. RIDERS SHOULD LOOK FOR TUBES THAT HAVE ENOUGH HANDLES TO ALLOW ...
...Water can cause corrosion in delicate places like the needle assemblies. This cause the pump part of the carburetor to not function. lay an old bedsheet under the carburetors in case you drop small ...
...it beeps... in the panel which little "icon" is blinking? Depending on which one, refer to your manual. I had this problem, and it was referring to low oil pressure which simply meant I needed to ...
bad /non starting i just purchased 80s 2stroke 30 hp manual.it started 1st timeat pre owners.as they do.he told me dont use choke,anyway.i switch on and pull and pull,good comp.no fire up,not even ...
... and ensure that the engine does not make awkward noises during cranking. If the engine was stopped manually, chances are it was not affected at all by the water. Change the oil, however. You schould ...
third pistion ran lean. It is put back based on the spec given in the service manual. How do I get my machine to start. Please advise. water temp sensor and cat temp sensors plugged back in at the box
311 questions posted
Usually answered in minutes!
22 Questions
15 Questions
2 Questions