...spa, all hooked up everything works fine except the jets won't turn on. When I press the button all you here is a clicking and nothing else! Any tips, could it be a fuse or something! I am not happy, ...
Spa pump does not start up. Can hear hum and click but motor does not kick in. I can start it easily if I turn the shaft a little by hand then it takes right off and will run for hours. Your start ...
...spa; it clicks, but does not start. I could turn the shaft with a wrench, all plugs work. the start switch has trash in it , use compressed air and blow out the back of the motor, this works most of ...
turn the heat up There should be an independent circuit breaker to control the tub, most commonly a 50 amp GFCI breaker. (Has a "test" button on the breaker itself) It is usually located either in the
...turn the therometer dial it clicks, and the pilot glows, but does not light. I have tried cleaning my filter and ir will work for a few hours then again the same problem. Any suggestion? Is it a ...
Question about Emerson Pool & Spa
...turn the jets on I hear a " click" and it won't run. It is a problem in the relay of that one motor in your spa electronic control most likely. If you have many jets buttons, you can unplug 1 pump ...
3 questions posted
Usually answered in minutes!
9 Questions
