...when reinstalling them. As I reinstalled the brush it sparked and now the mixer won't turn on either. Any suggestions on how I might get the motor running befor replacing the worm gear. check for ...
Question about Food Mixers
...worm gear and reassembling the mixer wont turn on. Any ideas? I am assuming this is a Kitchen Aid Stand mixer. Did you remove the motor brushes? If yes are they in correctly, they only fit one way. ...
replaced. (NB: When replacing brushes make sure the new brushes are correctly oriented to contact the armature. The concave contact face should rest completely on the armature?s commutators. If you've
...replaced the worm gear and cleaned out old Just replaced the worm gear and cleaned out old grease adding clean new grease. Plugged the machine in and it will not run at all. The machine had been ...
...be that you have damaged the Worm Gear inside your mixer. I have added a link below for a help video on replacing your worm gear: https://www.youtube.com/watch?v=n7813f_z6qM I hope this helps you
Question about Food Mixers
replaced the worm gear, now the mixer wont turn on! grrrr. the internal circuit breaker seems to be stuck open so i bypassed it to check voltage. it's getting voltage, but it's not turning. i have the
...worm gear So, I bought the part and changed it, but the mixer wont start I tried to removed the brushes but I forgot to unplug the mixer!! so stupid I saw a flash inside the holes (brushes) I thought ...
95 questions posted
Usually answered in minutes!
324 Questions
114 Questions
106 Questions
52 Questions
29 Questions