Hobart N50 Stand Mixer "paint drill" Questions

Help, the groove pin won't come out of the planetary! I already chipped so much paint of the mixer! Hello, I was given the KitchenAid K5SS Heavy Duty and I wanted to grease it. Frustratingly, after ...

Mystery part to early 1950's Hobart N50G Mixer; serial number 997185 I have taken apart an early 1950's Hobart N50G mixer and had many of the parts replated/restored/painted. I took the pieces back to

...hammering the groove pin will not come out of the shaft of the planetary. I chipped so much paint out of both sides of the planetary and still nothing. It seems like if I cannot get the pin ...

Mystery part to a 1950 Hobart N50 Mixer; serial number 997185 I have taken apart a 1950 Hobart N50 mixer and had many of the parts replated/restored/painted. I took the pieces back to a Hobart service

paint before you start to hammer the shaft. Also use a piece of wood on the top of the shaft so you don’t accidentally damage the top of the shaft with your hammer. Good luck. I hope this solution was