Question about Dishwashers
...- Drain valve stays open during filling, get the E4 error code for not enough water. Drain valve is clear and solenoid is working. drain valve solenoid stuck open = bad fill valve solenoid is
...valve solenoid. I have put a meter over the terminals of the solenoid. The resistance is 3.8k ohm. Is there any other test I should try to confirm that a new valve is deeded before I blow £40 odd on ...
solenoid) valve. Impedence across the solenoid after being disconnected is about 1.1K-ohms. Brand new inlet valve solenoid measures 1.2K-ohms, so I no longer suspect the inlet valve. Voltage to inlet
...valve solenoid. I would start by manually operating the water float valve a few time to see if that helps. You should hear a microswitch click each time the valve stem is moved up or down ...
...valve (solenoid valve) or the timer. Water is not pumped in, it flows in under it's own pressure when this valve opens. On the solenoid valve there are two electrical connections, you could remove ...
...solenoid valve this valve is spring loaded ,when the wash cycle needs water the solenoid is activated opening the valve and water enters when water is no longer the solenoid is deactivated and spring ...
...valve (solenoid) vibrates loudly. Would the problem be the solenoid itself of could it be defective Triac in the electronic control? i would look to the valve solenoid as the issue, if not the ...
solenoid valve. you can check this by opening line that feeds the valve to see if you have sufficient water flow. GET SOME TOWELS READY THIS MAY GET A LITTLE MESSY! turn off the water valve that feeds
...solenoid, the valve opens and diverts the water to the drain. Sometimes the solenoid, or the diverting lever, sticks and prevents the dishwasher from draining or filling properly. Try to free up the ...
Question about Maytag Dishwashers
solenoid and the valve lightly with the handle of a screwdriver to break it free of any obstruction. Then start the dishwasher again.Step 5: If the dishwasher still doesn't fill, test the solenoid
138 questions posted
Usually answered in minutes!
200 Questions
51 Questions
65 Questions
34 Questions
21 Questions