...valve is not operating (corrosion of the contacts) or there is wear on the rubber cap of the solenoid plunger that holds the air pressure in the lid seal. You can resurface the face of the cap by ...
...cap with little notches on it. Turn off the water and inspect the valve for debris. If you take it apart slowly, and catch the plunger and spring, it is easy. The only trick is having a pair of ...
...valve behind the front kick panel. It has a large castle-like cap. Sometimes debris is the cause of your failure. (50/50). Turn off the water, and just take it apart slowly and pay attention to the ...
Question about GE Dishwashers
...cap and see if there is anything blocking inside. Note: If there is no air gap installed, the dishwasher might not drain properly. If the drain hose is clogged, the dishwasher would not drain. If ...
...valve hobart sells a rebuild kit thats pretty easy 1str unscrew 2 screws that hold cap on and save with pair of plyers or channel locks unscrew top where 2 screws were screwed into,counterclockwise, ...
269 questions posted
Usually answered in minutes!
119 Questions
51 Questions
65 Questions
34 Questions
21 Questions