IPEC TREADMILL I HAVE A EPIC TREADMILL AND ITS STUCK IN A INCLINE What I have done, is remove the case to access the incline assembly. tyically a black tube looking thing with a small motor attached ...
I have a Precor C846i which started to display 'STUCK KEY' after using it the other day. Tried to use it again and the display still has 'STUCK KEY'. Need to find out the issue and how to troubleshoot
incline raises full and wont go down,t84 the incline perodicly gets stuck at full12 degrees and won't respond 1)signal false coming console or display board2) main motor controller is faulty.3)Pot
tempo 611t treadmill love my machine for the last 2 years but the other day it went to incline on its own and is STUCK on #5 incline. HELP Run the software calibration for easy diagnostics and fix it.
Question about Tunturi Exercise & Fitness
I have a T85 Treadmill and the running platform is stuck in the highest position. A message on the display says 'check Transmitter'. Is there anything I can do to fix it? I have a T85 ...
sole f80 stuck elevation LUBE the gear and shaft motor 2) test the input voltage motor, see the diagram attached, if there are the motor need repair. 3)see if there are some relais, and clean for ...
Question about Proform Exercise & Fitness
Does not turn on. When I press the re-set button, it lights up and then goes off again. Hello. This happened to me when I bought a Pro-form XP 550, and the solution was very simple - There is a ...
Question about Tunturi Exercise & Fitness
Regarding my Tunturi j800 stuck in the incline position: thanks Tim for the response. I'd love to manually lower it, but there is no flat head screw on any metal-encased fan. The only fan belon ...
lower incline treadmill stuck at about 1/2 incline.turn power on,insert key and incline lowers a bit,raises a bit then stops.5 incline lights work fine,go from lowest to highest in 3 pushes per ...
my treadmill is stuck in incline My treadmill is stuck in the incline position please RUN the software calibration for easy diagnose, troubleshooting, and fix it. see the diagram attached, for ...
1 questions posted
Usually answered in minutes!