Jura Capresso Impressa F9 Espresso Machine "lubricant coffee machines" Questions

...coffee is made it falls inside in the waste aread instead of ouside in the cup. Please assist! you need to clean / lubricate the "plungers". The normal clean cycle will strip off the lubricant over ...

...coffee.The I turn it off and for no reason, turn it on again and makes a few noises but the select button shows again. What is wrong with my machine.I think the liitle door that lets the used grains ...

Why is my F9 dispensing coffee directly into the grounds container instead of out the spouts? Looking into machine with tray assembly removed, using flashlight. I can see an inch or two of small black

What do I need to do when error 8 is displayed on turning on machine? Jura does not allow access to internal parts for cleaning. Brew group is the dirtiest part as it deals with complicated movements ...

How do I disassemble and clean the brew unit motor on my Jura Capresso E8? The machine will brew coffee but it goes through about three cycles to get the grounds to eject and be ready to brew again. I

mulfuction 8 Hi, On the display it shows mulfuction 8. Can somebody help me fix the problem?? for my E8 it meant block water flow - i had installed filter improperly. took it out, power down/up, error

...to do this twice on an an E75 and an E8. I finally broke down and bought seal kits and food grade lubricant for doing this. (I have only been able to buy parts from Europe online) One could by a

...Denmark I have found seal/o-ring kits available on ebay Germany. Make sure you get the food grade lubricant to apply to the seals as well. ...

Coffee doesn't flow through spouts My S-90 is routing the coffee thru the dump basket instead of the drip spouts in the the front. I've done a filter change cycle and ran steam mode quite a few times,