Kenmore 93042 Gas Dryer "ignitor" Questions

Ad

how to check the igniter (continuity?) If there is power to the ignitor and it does not glow the ignitor is bad. If it does glow,place a clamp on amp meter over one wire of the ignitor and turn the ...

Ad

Question about Dryers

1 Answer

...BREAKER STILL NO HEAT.CANT OPEN GE DRYER DVL223GB 2WW TO CHECK ELEMENTS Have you checked the ignitor in the unit yet by doing an ampere test to the ignitor? Usually an ignitor will draw

Ad

Question about Kenmore Dryers

1 Answer

...something? But I cant seem to figure out how to disassemble the dryer. I find that quite often the ignitor is out of alignment or the glass window is covered with lint. a gas dryer blows air through ...

Question about Amana Dryers

1 Answer

ignitor glows but short cycles Checked air flow, nothing seems to be clogged. Ignitor glows for about 30 seconds and occasionally blows a flame, but then stops. Mostly ignitor glows and blows no flame

Question about Whirlpool Dryers

1 Answer

...running and the timer is set for heat, the control thermostat is energised. It powers up the flame (ignitor) sensor, the ignitor, and the solenoids. The gas does not come out with those solenoids ...

Question about Dryers

1 Answer

...first thing I would do is check all fuses and limits for continuity. After that I would check the ignitor for continuity. If that was fine I would check the flame sensor. The sensor must be cold

Their is no pilot light. The system uses a glowbarOPERATION The newer dryers use a silicone carbide ignitor for ignition. If the Fuse is ok the gas assembly gets power from the control thermostat. The

my gas dryer keeps shutting down the heat cycle and I have changed the hot surface ignitor The gas valve assembly consists of the ignitor, the flame sensor, and the solenoids. In order for the gas ...

Question about Dryers

1 Answer

...on dryers for many years. Today's dryers have a gas assembly consisting of a silicone carbide ignitor, a flame/ignitor sensor, and a pair of coils. When the drum temp drps below 105f the

Question about Whirlpool Dryers

1 Answer

...the pilot light on the dryer? Modern gas dryers do not have a pilot light. They have an electronic ignitor (glow or spark). A glow ignitor turns on several seconds before the gas turns on and should ...

Not finding what you are looking for?
Kenmore 93042 Gas Dryer Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...