Kenmore 73952 Gas Dryer "switch push start" Questions

Ad

push to start switch only works when held in. Also have lost heat. I have a new push to start switch, but can't figure out how to open up the housing to get to the old switch to replace it. Kenmore ...

Ad

Question about Maytag Dryers

1 Answer

START SWITCH BROKEN WON'T START WHEN START BUTTON PUSHED try joining both wires on door push switch then push to start,if it starts then have to change push button on door,or fuse inside blown

Ad

...push to start switch welded together. Even though it might appear to go in and out properly, the insides of the switch are bad. Remove the back cover of the consule. Remove one of the wires connected ...

Question about Roper Dryers

2 Answers

...push button switch contacts stuck together. On a Kenmore in my home I was able to remove the push to start switch from the control panel, taking a digital picture first noting which wires went where, ...

push to start switch, or the centrifugal switch on the motor. You would need an ohm meter to check the push to start. The way the system works, is the power goes first to the door switch, and then the

...push it. I have found that the switch activated by the door close or turns on the interior light when open on is likely the problem. You may notice that if the door is open and you push the start ...

...push the start button, it will buzz. So if the door is closed and you get this buzz when pushing the start button, there is a problem with the door switch. The start button "thinks" the door is open, ...

push start button in dryer starts as soon as releases dryer shuts off. I can straight wire or connect two conections and it works perfect, shuts off when finished. I replased the start switch (not the

...switch in, push the start button, and manually get the drum turning, and it works fine. There has to be a "switch" that gets the drum turning at start-up? Any suggestions wud be appreciated. Yes, ...

Question about Kenmore Dryers

1 Answer

push the start button dryer will run for 2 seconds.if i hold the button in the dryer will continue to run but will not generate any heat in dryer. Kenmore elite 110.63952101..electric dryer disconnect

Not finding what you are looking for?
Kenmore 73952 Gas Dryer Logo

593 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...