Kenmore 73952 Gas Dryer "70 series burner" Questions

...70 series does not lite Kenmore propane dryer 70 series does not get hot because the burner does not lite Hi, Assuming the gas is on. The most likely problem is a bad ignitor. Remove the bottom front ...

I have a 70 series gas dryer and the igniter comes on but the burner wont light check the thermal fuse with ohm meter to see if has a reading if ok your coil on your gas valve generally not good

no heat in dryer , a kenmore 70 series the burner is ignited by a electrical ignition sensor which is causing it not to light up

...gets hot My Kenmore 70 Series gas dryer m/n 110.97573230, s/n MF1306465 just stopped getting hot. It runs still, but just cold air. check the spark ignitor out for that lights up the burner to ...

...70 series,does not dry dryer does not dry,what ever setting you set, the burner comes on but it will only stay on for a short time and the flame will go out Check the vent pathway. Perhaps the ...

...70 series and replace it Thi igniter is on the burner assy located in the bottom of the dryer. This manual will tell you how to open your dryer. It does not tell you how to change the igniter but it ...

...70 Series dryer, just this weekend, the drum turns but no heat..... after a little search online, I suspect the pilot light went out. Where is the pilot light located? I lost the manual. Please help. ...

...70 serie (model 110.72712101), will not heat up. Cleaned filter and exhaust vent. Any suggestions will be of great help. Thanks! The ignitor is probably bad not aloowing the gas valve to come on and ...

...70 series gas dryer cycles a few times then stops my dryer works for about 20 minutes, burner cycling on and off like it should, after that the igniter lights, but the burner wont fire..what would ...

series 70 Kenmore Gas Dryer I look through the peep hole on the front and the pilot lights but does not stay on for very long. It will glow but the flame does not come on after the first time. suspect