Kenmore 75944 Gas Dryer "heating coil stays time" Questions

...heating too hot and I had to dry on extra low on timed heat. Replace the 2 gas valve coils, check the link below to have an idea of how they look like. Maytag Dryer Gas Valve Ignition Solenoid Coil ...

dryer doesn't stay hot, starts out getting hot, then the heat shuts off gas coils part 12001349.are bad,most of the time when the coils are failing they work until they heat up,they are located on the

...time of heating then cooling develop a short when they heat up...It may appear the gas lights to start but then goes out until the safety valve coils cool back down. Here is a picture of the coils ...

...stays lit long enough to produce any heat. I have checked the following items: 1. Igniter checks out good 150oms 2. Radiant Sensor checks out good 0oms 3. High Tempature thermonstat good 0oms 4. Drum ...

...heating up. I took the panel out, I observed that if the flame gets on (doesn't start the flame every time), it will not stay on. HI. the problem. is with the coils on the gas valve They will only ...

...time of heating then cooling develop a short when they heat up...It may appear the gas lights to start but then goes out until the safety valve coils cool back down. Here is a picture of the coils ...

amana alg643rb gas won't stay on I am having issues with my dryers gas staying on. It ignites the first time, flames and heat appear but that is it. The dryer will just run for hours with no heat. ...

...time of heating then cooling develop a short when they heat up...It may appear the gas lights to start but then goes out until the safety valve coils cool back down. Here is a picture of the coils ...

heating elements wont turn off. The top elements come on as soon as the oven is plugged in and stay on. They do not shut off when the oven goes into standby. i don't work on toasters but i'm sure it's

ignition but heat dont stay on ignition but dont stay on If it were to stay on their would be a fire. A gas dryer continually adds a little heat at a time. That is why the solenoid coils get weak with