Kenmore 60172 Electric Commercial Dryer "belt pulley" Questions

Ad

...belt pulley is you would grasp belt coming down from the left side of drum then come across the top of belt pulley that is on motor shaft going clockwise around that pulley then continue back to your ...

Ad

...and it will work.take the belt off of the pulley,grab both parts of the belt,put the belt over the left side of the pulley,push the pulley over to the right and connect the belt to the motor ...

Ad

...the motor pulley and the belt is on. let me know if you have any questions. Phil hi Phil,my tensioners are completed units..no way of putting belt on them,,its a whirlpool awz7303,,what should i

Question about Estate Dryers

1 Answer

...goes around the drum and then around the motor pulley and thru the idler pulley. in fact if you put the bottom loop of the belt thru the pulley from the left you then loop it around the motor

Question about Dryers

1 Answer

...belt pulley drum drive. With this system, two or three pulleys of different sizes set the speed of the drum. To change this type of belt, decrease the tension on the idler pulley and install the new ...

...Pulley". With the Belt Ribs Facing Toward the Dryer Drum, position the belt on the tell tale Ring Mark on the Drum letting the Belt Hang Down below the Drum. Place The New Idler Pulley into the Slots ...

...belt on the motor pulley and then release the idler pulley it should tighten up your belt.the outside of the belt should run along the inside of the idler pulley.it will almost look like a figure

Question about GE Dryers

1 Answer

...it is part of the belt loop. you will need to move the tensioner pulley against the spring force then place belt on tensioner pulley and then release the tensioner pulley and belt will now be

belt on pulley and use other hand and turn fan from inside so blower's pulley turn and belt get to pulley. last tight the pulley again. turn fan by hand to make sure belt run ok. hope it will help you

pulley makes the belt too short to get fully around. Wrapping clockwise leaves the belt too long and it also does not contact the motor pulley at all. Need advice. Most dryers are tension idler pulley

Not finding what you are looking for?
Kenmore 60172 Electric Commercial Dryer Logo

90 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...