Kenmore 65942 Electric Dryer "tell heat element going" Questions

...element. Can you please tell me which wires go where...Thanks To the heating element goes Red and Red with White. To the Hi-limit thermostat goes Red with White and Black. To the Thermal cut-off goes ...

...tell you. You could also make one yourself, if you are creative. The heat element will pass 110 volts if it is OK. You could go as low as a 9 volt battery if your are trying to test it. Be

...heat it is proberly your element, broken wire, timer or thermostat. if u have an electrical test meter i can tell how to test 4 faulty component. 90% of the time i have found it is the element . ...

heat I have seen advice that says to check the circuit breaker, but no advice to where it is located. Can you tell me where it is on the dryer? hi!! your circuit breaker should be located outside your

tell if it is bad is to run the machine in a dry cycle and see if there is 110 volts across the heating element terminals. If there is power, but no heat, then the heating element is bad. That element

HEAT. CAN YOU TELL ME THE PROBLEM? Without seeing it, and very little info to go on, let me ask this, does the drum turn? If there is no heat, go outside and check the exhaust, do you feel air blowing

...element the old element has 3 wires the new element only has a place for two and everywhere i go tells me it is the correct element. How do I install it? It has 3 red and 1 white wire on the back ...

...heat? Remove back panel and check for power at the heating element. If power is present, the heater is bad. If not power, follow the power line back to the controller and check for power there. ...

heat. Looked at online manual that said possibly one of circuit breakers in unit is blown, but they don't tell you where they are in the unit. It is most likely the heating element or thermal cut out.

...tell what part the heating element is in mmy dryer The heating element will be a long spring like object mounted to a metal plate with two electrical connectors going to it. It will fit into the air ...