Kenmore 72055 Air Conditioner "dry inside light works" Questions

dry with hair dryer a bit, then turn unit back on. Locate the manual, or the wiring schematic (usually located on the main cover panel inside for the unit.) and look at the flash codes. This will tell

...dry but when you put it on heat or auto it stops and the defrost light comes on and no heat comes out. Please help!! Its 14 deg outside!! When a heatpump goies into defrost, the unit is in a/c mode. ...

...bone dry, and been that way for months, and when I transported it to fix it, it was laying on it side in my car and nothing spilled, inside our out, nothing sloshes around. what does f e on screen ...

...inside fan does run. Is there a place where I can find what the error codes mean.?? To work out what the error code ispress the orange start/stop button on the remote controller so unit operationis ...

inside coil can frost up if dirty or filter is clogged. take the Unit out and clean well. you can purchase a spray that will remove all the grease and dirt - be careful not to bend tubing. use a light

...inside,no water came out,and the red light always flashing. if any body can give me a hint on how to make it turned off in order that the AC will work. PS: last summer it was functioning well,only ...

...inside thats good not sure why its not workingno display showing on front panel and remote/manually pushing power does not start it Hi and welcome to FixYa I am Kelly. As you know there is a 3 minute ...

...inside the ac perfect for mold growth, some units have a coil dry mode which runs the fan to dry out the system after use. Ultra violet bulbs can be used in A/C handlers and ducts to prevent mold. ...

...dry bearing in the room air fan. If you can get to the fan, put 2 or 3 drops of electric motor oil on the fan shaft and work it into the motor housing by hand. Make sure you are getting power at the ...

inside. when i put the water collector tray in the machine switches off. I have switched it off and on and set it to dry but nothing is happening. If i take the water collector out then it switches on