Question about Samsung Dishwashers
...was cycle flashing smart auto and normal lights at same time and not draining out water please help ...
Question about Samsung Dishwashers
...giving three flashing lights on samsung 2012 model It depends on what 3 lights are flashing. These lights are a code as to what is wrong, and how to fix it. Smart auto and normal are ...
Question about Samsung Dishwashers
normal, then goes to a non-flashing start auto button. Hello. Please study the attached photos...the error codes for your model are displayed. Ignore the low rinse aid light. Please let me know if you
Question about Samsung Dishwashers
...normal heavy and smart/auto lights all flashing? why do these all flash together after about 5 minutes and it stops running, thank you That's a High-temp Heating Error. It's usually caused by a bad ...
Question about Samsung Dishwashers
...normal and smart auto comes on flashing. The flashing lights are error codes. I need the model number of the unit to make a more accurate diagnosis--usually, each light will blink a certain number of ...
Question about Samsung Dishwashers
...is flashing smart auto and normal lights (High temp error) This is usually caused by a bad ECS sensor. (You can get to it from the right-side of the dishwasher, after you remove the metal
...normal wash then heat dry. do it 3 times Press and hold the "Auto Clean" button for 3 seconds and the press the "Drain Off" button. Hey, It worked for me. Steve Cannot get the water to pump in unless ...
...Auto and pan wash light starts flashing It is possible that the machine does not start off the cycle because there are errors or back feedback from the inputs. For the program to start up the main ...
Question about Samsung Dishwashers
Samsung dish washer flashing lights... normal, heavy, and smart auto are flashing... only stays on for a couple minutes then shuts off Water level error. Most likely brake case assy.
Question about Samsung Dishwashers
normal cycle, no water, then the smart auto light starts to flash A Samsung Dishwasher flashing the Smart Auto light indicates a Water Supply Error (Not Enough Water) has been detected by the internal
13 questions posted
Usually answered in minutes!
485 Questions
214 Questions
206 Questions
161 Questions
175 Questions