Kenmore 54501 Dehumidifier "attach hose" Questions

I attached a hose to the drain hose connector. When I insert it into the drain hole it is blocked by the back of the dehumidifier. What iw the correct way to insert? Can you send a better diagram? The

won't catch and empty water through attached hose. won't catch and empty water through attached hose. still filling bucket even though I attached hose. My humidifier has a knockout inside the hose

Attached hose discharge. The attached hose discharge use to work fine but now it only puts the water into the reservior which I have to dump all the time. How do I get it to use the attached hose ...

/my dehumidifier has a hose attachment on the back. how does that work? The hose attachment is used in place of the water collection bucket, to drain the water directly into a floor drain or a sump ...

...Attach a length of garden hose no longer than 5 feet, to the threaded drain hose connection that was supplied with your unit, to carry water to the drain. 1. Remove the drain-hole cover on the back ...

The condensate is draining into the bucket despite the fact that I have a hose attached. How can I fix this? I have a 70 pint unit, which has been in service for approximately 17 months. I have done ...

Where can I get hose ,hose attachments for my Goldstar dehumidifier? Can not locate my manual or attachments. Fortunately, it doesn't require a special hose, as a standard Garden Hose Connection ...

...can attach a standard garden hose. You will need to drill out the center of the hose connector with a 1/4" drill bit. Then you can attach the hose to the bucket and the other end into the floor

attach the hose at the reservoir; from your description, Haier apparently has a separate location. Check that the point that the hose attaches has an opening (many don't, they expect you to drill it).

The bucket of my Dehumidifier is filling up with water. I have a hose attached but the water goes into the bucket.Any help ? hose or spigot hose attaches to may be blocked