Kenmore 16.7 cu. ft. / 473 liter Upright Freezer 23725 "cups 1 water" Questions

up? arm down ...Pour about 1/2 cup of water into ice maker . If it dumps , replace the water valve . If doesn't dump , replace the ice maker . Also make sure the coils are clean of dust , lint , etc..

...1/3 cup of frozen water on the freezer bottom. It is not comming from the ice maker. It has been humid recently, but we have not had this issue before. Thank you for any insight you can offer. Hi, ...

1/2 cup of water into icemaker ( unless ice is already there ) . If the icemaker dumps the cubes , then the water valve is bad . If it doesn't dump , and holds the frozen cubes , replace the icemaker

...1 minute first. If there is not water entering the unit when first turned on, look for that issue. Water turned off, water valve not working or some restriction, clogged water filters, etc. That is ...

...1/2 cup or so water in it. Water in running down the back wall of the fridge underneath some kind of cover back there. Do we need a repair, or could it be caused by something blocking air flow? We ...

...1/2 cup of water into tray and wait for a day. make sure shutoff arm or switch is on or down (arm down) if it makes ice then the icemaker is ok. if it dont then hold up. if it makes ice then either ...

...1/2 cup of water into icemaker and see if it dumps the cubes after a few hours . If it does , and icemaker does not refill , then water valve is the problem . If the icemaker never dumps the water ...

...1/2 cup of water into the icemaker. if it does make ice then replace the water fill valve. if there is ice still in the ice maker tray you still have to check the water fill valve before we can say ...

...1 gallon of water). Rinse well with clean water to remove any bleach solution so the freezer doesn't rust. Then wipe dry. Now would be a good time to defrost the freezer too (remove everything ...

...1 to 2, reading was 162.8K ohms. Removed panel to check thermistor, then put it in a cup of ice water-now reads 32.1K ohms. P checked wiring from front panel to connector at bottom of freezer-ok... ...