Kenmore 30172 / 30174 / 30179 Gas Single Oven "tell oven igniter bad" Questions

Ad

...oven. SOUNDS LIKE YOUR GAS REGULATOR IS TURNED UP WAY TO HIGH IF YOU CAN SEE THE GAS. THE IGNITION SWITCH MAY BE BAD. YOU CAN CALL THE GAS COMPANY & THEY CAN COME OUT TO CHECK IT OUT USUALY FOR ...

Ad

Question about Wolf Range Ovens

1 Answer

...oven and the ignitor glows but no gas flow after 30sec or so I tap on the safety value and then the gas flows could it be that the ignitor is not telling the saftey value to open or is the safety ...

Ad

...igniter is hot?? Thanks, Keith The flame sensor is not allowing the gas valve to operate. The gas valve could be bad, but probably the flame sensor. If you can use a meter, we can check to see which ...

Question about Ovens

1 Answer

...oven light and control panel is still functioning. The top of the range is in good working condition. The range was purchased August 2008. Can you tell me what the problem is? Hi, The ignitor is not ...

...oven on. Can you tell us where the pilot light might be? Thanks! Hi, The ignitor is not working right and is going bad.... have the repair man replace the ignitor, or DIY.... Check out this tip about ...

Question about Frigidaire Ovens

1 Answer

...oven model #FGB500CGSB that will not light. Ignitor glow stick glows bright orange, but the gas never kicks on. Which part needs to be replaced? Can't tell from any of the diagrams I find. Hi, The ...

Question about Ovens

1 Answer

...oven will not heat. I used it on sunday and notice it took a long time to bake. When I went to use it monday night it would not heat at all. Can you tell me how old the range is? We moved in in ...

Question about GE Ovens

1 Answer

oven that the pilot light would not light. How can I tell that is the Glowbar and not the saftey shutoff valve or the front knob on the main panel? Thank you [email protected] The following link

...tell me how hard it is to change out this bake tube and how to do it. I found the bolt inside the oven near the front, what secures it at the back, is it just the two bolts that it looks like I can ...

Question about Ovens

1 Answer

...oven door and look at the frame where the door closes into and you'll see a tag with the model and serial number,call your parts store,give them the model number and tell them you need a bake ...

Not finding what you are looking for?
Kenmore 30172 / 30174 / 30179 Gas Single Oven Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...