Schwinn 430 Elliptical Trainer "panel" Questions

battery low The battery is not fully charging to the 12v requirement their are a couple of screws that hold the side panels then rotate the panels counter-clockwise and they will come off. Take the ...

when turned on makes clunking noise. I am able to use the machine when not pluged in. when the electrical display is on makes clunking noise You may have to disassemble the unit remove the side panels

during use, the speed goes to zero on the panel and then a couple minutes later, it shuts off....Schwinn 430 elliptical. sounds like the sensor is loose or bad.I have the same schwinn 430 elliptical ...

How do I release a stuck key in the key panel? as i begin a session, the key board will flash a stuck key sign. if i continue pressing different keys i get it to work after many attempts. What need to

I have an efx 546i and when I try to use the incline the panel states: No ramp, low battery The ramp system has a battery monitoring system. If the battery voltage falls below 11 Vdc when the ramp ...

...plate getting error #4. Elevation of unit has gone too high and front rollers are hitting the front panel. Precor Error E4, Incomplete Initialization Probable Cause Indicates that an incomplete upper ...

me to take the incline down. The incline on the elliptical is so high that the wheels hit the front panel. Help please! Precor Error Code 42 Error Code: 42 Manufacturer: Precor Model: All Models Error

my Precor EFX 546i control display panel would not work. i.e, no resistance control, no level control, the panel would not hold a charge when I started to pedal. the battery was then replaced but the ...

I can't locate the battery on my precor efx 546i. I removed the screws on the panel and I don't see a battery. What does it look like and where is it located? It is located at the front under the ramp