...switch which controls the hot surface light is stuck closed. If this is a new unit, I'd return it. If not, I would check the switche(s) for the hot surface light -- when the unit is cold, unplug one ...
...switch which controls the hot surface light is stuck closed If this is a new unit, I'd return it. If not, I would check the switche(s) for the hot surface light -- when the unit is cold, unplug one ...
Question about Cooktops
Blog that deals with this problem. Appliance Repair Forums Typically a bad infinite switch will cause hot surface light to stay on. I would start by testing the switch for the burner that doesn’t work
Question about Jenn-Air Cooktops
switch, you can test it with a multi meter. Surface burners are typically either a coil type, solid type or a ribbon coil as used in smooth top ranges. All of these consist of a heating wire that uses
...switch or the igniter?Thanks. Last night, we had that exact problem with our 5-burner Thermador clicking continuously (until power unplugged). And this also occured after an over-zealous cleaning. I ...
...surface unit is on." If the burners are all set fully to the Off position, this lamp should be off. The off position requires that the knob be pressed in to change to Lo, High or any position ...
...surface lights dimly on when it is not hot. This problem just started. Thanks for your help! you have a bad switch. You can check each switch for voltage going to the light one at a time, if your ...
3 questions posted
Usually answered in minutes!
32 Questions
14 Questions
18 Questions
12 Questions