...cable on the 7speed Shimano SIS derailler and Ithink I ran the cacle through the shifter wrong. I can only get three gears to shift. This is a combo brake and shifter handlebar mount. Hi, All shimano ...
cable tension all the way (this adjuster is on the shifter of a mountain bike or the down tube of a road bike). Pedal to make sure the chain is not rubbing on the derailleur cage. If it is, adjust the
...shifter cable-I have a 7 speed mountain bike-what are the procedures to make sure the tension is correct and properly shift to all gears. It is a trigger shifter. thanks, Assuming that the limit ...
adjusting. So I took the bikes to a local bike shop and he said they are too old to adjust. These bikes have less than 20 hours of ride time on them, kept indoors (look new!). Does this make any sense
...cable tension / cog-ratio. They have adviced me to buy two new shifters (250 pound) in order to help this problem. Now my question is: 1) Can I get spare parts for the right (rear) shifter? 2) Is it ...
...thing back in and then adjusting the spring tension...ps i have checked cables routing and shifters all fine. Don't fiddle. ...
...adjusting it by putting the rear derailer on to the big cog and there will be a small plastic nut that you can adjust in or out that will bring it in or out. If that dosn't work than try at the same ...
...cable tension, but with the same results. adjust barrel on rear mech clockwise till gear shifts click brake lrver for next gear repeat same as before with barrel. If this fails stat from bottom og ...
cable is new and slides free though the guides when disconnected from the derailluer. Is it possible the shifter is the problem? Is the spring tension in the derailluer adjustable? Any recommendations
...in the shifter cable or maladjustment. Spring tension in the rear derailleur is all that drives it to the smaller cogs. ...
2 questions posted
Usually answered in minutes!
