Kenmore 23513 Progressive Bagged Canister Vacuum "carpet beater" Questions

Carpet Beater for Central Vac I have a Hoover central vacuum with a carpet beater brush. One of the wires entering the carpet beater was frayed and eventually broke. I took the carpet beater apart cut

...CARPET' position and the beater bar is still not rotating it could be that there is something entangled in the beater bar, or the belt is worn or broken. To check this first unplug the vacuum cleaner ...

...beater is not functioning. I have a Dyson dc07 upright and the drive for the beaters doesn't turn the beaters. When set for carpet the drive makes a tremendous amount of noise and the beaters don't ...

...beater brush to accommodate different carpet lengths. Even with a new belt, the brush will not spin if the height is too low. Try adjusting it all the way up, then while it is running, adjust it down ...

...How do I accomplish that? Thanks you can adjust the height on some vacumes like for bare floors and medium nap it will adjust how far the beater bar is from the carpet see if your is ...

...roll across the carpet, because their is too much suction.? Turn on the beater bar with the gray button next to the red power button. The powered beater bar will "propel" the vacuum across the

...beater on/off button, the reset button, and turned the carpet height knob. No results from any of the actions. Beater doesn't move at all. The belt is installed correctly and not stretched. ...

carpet with beater brush My Hoover WindTunnel vacuum no longer contacts the carpet with the beater brush and has very little suction for the carpet. It works fine when I use it with the accessories. I

...carpet, 7 year old tried and true DC14, wouldn't push across regardless of beater brush on or off. Called Dyson this morning, they suggested removing the small gasket between the floor plate and the ...

...switched off the beater bar via the dial on the head? Some models have a 'hard floors' and a 'carpets' setting (which disengages/engages the beater